The HEMCO LE fume hood incorporates a Unitized superstructure, with non-metallic dual wall construction for total chemical and corrosion resistance, strength and durability. Integral one-piece fume chamber is glass smooth with all coved corners.

The AireStream baffle system with vector airflow slots directs the air through the fume chamber and through the exhaust outlet with minimum turbulence and maximum airflow efficiency, for low flow constant volume performance. Vapor proof LED strip light fixture and control switch pre-wired to a single point junction box, 115V/60Hz AC. ASHRAE-110, NFPA-45, U.L. 1805 Classified & SEFA Recommended Practices.

Uniflow LE Airestream Fume Hood

Extractors use the Zaiput platform to perform virtually any cannabinoid separation, custom-tailored to their business’ exact desired process. The result is a scalable, predictable, highly efficient separation that can lower the price of core operations for many extraction labs. Proven separations include D8/D9 cleanup, THC remediation, minor cannabinoid purification, and pesticide remediation. These real-world results show that the platform is capable of achieving high levels of separation with minimal loss of (and damage to) cannabinoids. More processes are being validated as customers adopt the technology.

The collaboration began with a period of R&D between SciPhy Systems and Zaiput Flow Technologies that leveraged SciPhy Systems cannabinoid extraction knowledge, and Zaiput’s groundbreaking CC-LLE technology advancements (which are currently being applied to multiple industries). Together, the two firms identified the broad reaching use cases for Zaiput separators in the cannabinoid manufacturing industry. The firms subsequently validated and patented the separation of cannabinoids using Zaiput separators. The patented process is now available for custom optimization and licensing by cannabis operators. SciPhy Systems acts as the exclusive vendor and licensing agent for the new technology.

The CC-LLE process uses a series of Zaiput’s unique membrane based separators to create a counter-current mixing and separation of two immiscible liquids, allowing for selective and safe separation of cannabinoids and other compounds at high resolution. Zaiput separates cannabinoids as similar as Delta-8 and Delta-9 THC Isomers, or remediates THC from highly valued minor cannabinoids such as CBC, or CBD-V, and more.

Customers benefit from Zaiput’s advanced wet-lab capabilities. Product samples are run through an accelerated solvent system tuning of their LLE process. The tuning process provides a custom-tailored, scalable, efficient, and cost-effective method for developing users’ cannabinoids separation processes. It expressly reduces the cost of processes usually performed with chromatography and other expensive approaches, and does it in a small, manageable footprint Real world data informs the construction of a system specifically fit to their process requirements, at the lowest cost. This is a revolutionary step forward for many processors, as Zaiput allows them a clear path to predictable, efficient processing and resulting increased profitability after their tuning period.

“SciPhy Systems CEO Emmett McGregor said, “We have spoken with many processors in the industry who have struggled with the high operating costs of Prep-HPLC and the mechanical unreliability of Centrifugal Partition Chromatography. With Zaiput we found an ideal combination of mechanical simplicity, while maintaining the cost benefits and adaptability of Liquid Liquid Extraction. Our new patented process will make cannabinoid separations more accessible and reliable for sophisticated manufacturers of cannabinoid ingredients and products, while leaving the door open for a huge range of potential LLE applications on the same hardware in the future.”

This launch represents a significant advancement in the field of cannabis extraction and purification. With Zaiput CC-LLE, operators can reduce the cost of their processes, and develop new processes for their extraction business.

SciPhy Systems is a leading provider of cannabis extraction and purification technology, SciPhy Systems is headquartered in Portland, Oregon.

SciPhy Systems, one of the leading innovators of cannabis extraction, processing, and purification technology, announced the launch of its new cannabinoid separation platform using Counter-Current Liquid Liquid Extraction (CC-LLE) with Zaiput separators.

New CC-LLE Custom Cannabinoid Separation Platform Launches with SciPhy Systems and Zaiput

Designed to mix powders into liquids and break down particle agglomerates to generate fine stable dispersions, these mixers make a wide variety of batters, thin pastes and slurries.

The pictured floor mounted model HSD-15 High Speed Disperser features an air/oil hydraulic lift with telescoping cover which allows the end user to mix different batch sizes and prevent stratification while keeping the vessel covered all throughout the mixing cycle. This helps to contain dusts and vapors for improved operator safety and cleanliness. The 12” disperser blade operates up to 1590 rpm to induce vigorous turbulent flow within a low viscosity batch, creating a vortex into which dry ingredients can be poured for fast wetting. The blade speed may be changed as the batch thickens or increases in volume to maintain the vortex and rate of material turnover. The cover has a 1/3 hinged port for the easy addition of powders into the 150-gallon stainless steel mix vessel.

Easily operated from a 7” HMI display, PLC controls allow operators to program and run recipes based on speed, time and hydraulic lift raise/lower cycles. Safety limit switches prevent operation of the mixer while in the raised position or without a mix vessel in place.

The ROSS line of High Speed Dispersers are economical mixers widely used in various industries such as chemicals, polymers, composites, inks, paints, adhesives, and food production.

Versatile and Cost-Effective High Solids Mixing

With many global installations, the SpinDexer rotary bottle filler is available in several models including its base model for up to 60 bottles per minute, its HS model for high speed applications up to 150 bottles per minute and its XL model for large format club sizes.

Its unique filling system allows for sticky gummies to be filled thru narrow neck containers by eliminating bridging and ensuring optimal bottle transfer from each traveling funnel.

This SpinDexer rotary bottle filling machine and PrimoCombi combination weigher can accommodate both gelatin and pectin gummies as well as sanded, sugared, oiled and waxed formats.

WeighPack Systems Inc, leader in turn-key gummy packaging automation presents its PrimoCombi® count by weight filler with high speed SpinDexer® rotary bottle filler.

SpinDexer with PrimoCombi Vitamin Gummy Packaging

Dispensing from drums and weighing procedures are typical applications. Drums or equipment can be easily rolled into the enclosure through the strip curtain entrance. Both the process and surrounding environment are protected from contamination. A downward flow of HEPA filtered air maintains a cleanliness level at drum or working height while all exhaust air exits out through HEPA filters in the rear wall at floor level. The interior is under slight negative pressure to ensure that no contaminant escapes out of the enclosure.

The “CCS” Enclosure locates directly on the existing floor. Optional roll & set casters are available for mobility, electrical and plumbing service fixtures, tables with work surfaces and enclosure floors are available. Shipped disassembled.

 “CCS” Controlled Containment System Enclosures are engineered to safely contain and control airborne particulate to and from sampling procedures. 

CCS Controlled Containment System

The adjustment feature allows users to fine-tune the air flow to achieve the most efficient pneumatic handling of continuous waste. Adjusting the air flow to a site-specific application conserves power consumption. For systems with multiple pressure blowers, the use of an Energy Savings Venturi can reduce the number of blowers required. In addition to reduced energy usage, these proven Venturis convey material through the system without touching any moving parts, significantly reduce maintenance, with far less dust than cutter or chopper systems. Available in mild or stainless steel, in standard sizes from 3- to 8-inches in diameter, and Jumbo sizes from 10- to 18-inches in diameter. AirTrim Adjustable Energy Saving Venturis are ideal for paper, plastic, film, and foil converting applications, label matrix printing applications, as well as waste systems where the materials must remain intact such as the conveying of food, vegetables, milk cartons, paper bags, plastic bags, soda cans, and more.

Venturi systems can convey a continuous ribbon of material to a container, collection bin, compactor, or baler for removal or recycling. They are a simple and cost-effective solution for many trim removal applications. Standard sizes available from 3-8 inches in diameter, with jumbo sizes available from 10-18 inches in diameter. Custom Venturi designs can be developed for applications where a standard size is insufficient.

In a Venturi/Inducer system a blower generates air pressure which is sent directly to the Venturi where it is forced to make a 90-degree turn and flow through an “escape gap.” At this point, the air is moving at such a high rate of speed that suction is created on the intake (negative side) of the system where the trim is collected. After moving through the Venturi, the air pushes the uncut waste trim (positive side) to the desired location or receptacle. The trim is pulled into the intake at the press or machine side and travels straight through the venturi to the designated location without touching any moving parts. Because waste trim stays as is, with no chopping or granulating, system maintenance costs are very low. These field proven systems provide years of low maintenance service with low operating costs. Venturi/Inducer systems efficiently and cleanly process a continuous flow of waste trim to the collection area, making them ideal for use with balers or compactors. The patented design of the AirTrim Energy Saving Venturi includes an adjustable gap which allows the airflow to be optimized for the most energy efficient configuration.

, call (888) 247-8746, or write AirTrim, Inc., 1701 Dalton Drive, New Carlisle, OH 45344.

AirTrim, Inc., a leading manufacturer of trim waste removal systems for printing and labeling and inducers for recycling and material recovery facilities, introduces their extended range, patented, adjustable Energy Saving Venturi which may reduce energy costs by up to 30%.

AirTrim Adjustable Energy Saving Venturi Reduces Energy Costs by up to 30%

Constructed of chemical resistant polyethylene (PE), the Full Size model sits atop a standard IBC tote, covering the entire surface of 275 – 330 gallon IBCs. It features a large surface area and collection volume for fast transfer of materials from bottles, jugs, drums, and more. Liquids run off the domed base and through a large drain opening into the standard tote opening. Units sit atop IBC or can be affixed using optional connection kit. An optional lid can be attached while the funnel is not in use or hangs on the side when in use. An optional coarse strainer is available for the drain. The FALCON Funnel Model Full Size is ideal for the safe, fast, and efficient refilling of totes, making it a useful addition for any facility using IBC containers.

DENIOS stocks the FALCON Full Size as well as other FALCON Funnels for IBC totes, drums, and other containers in their Louisville factory for immediate shipment. For more information on the FALCON Funnel Full Size visit 

. For additional information on DENIOS US, visit 

, or chat with a live representative online, or via email at 

DENIOS-US introduces the new FALCON Funnel Model Full Size for the fast, safe, and efficient refilling of IBC totes.  

DENIOS Introduces Full Size Funnel for the Fast and Safe Filling of IBCs

A needle valve for speed control allows this ½ HP disperser to operate from 500 to 5000 RPM, with maximum agitation achieved when supplied with 100 PSI at 71 CFM. The stainless-steel shaft is drilled and tapped on end for bolting on a two-inch-diameter design A dispersion blade. All wetted parts are stainless steel for chemical resistance. The disperser can be raised and lowered by hand, and a support clamp securely locks it in place. The air motor weighs less than the electric model and is inherently safe in combustible environments. The INDCO HSD06 high shear disperser is ideal for laboratory, pilot plant, or production operation settings, and can incorporate a variety of materials including pigments, food ingredients, hand creams, and more. Other HSD models are also available, including those featuring a tachometer for rotational speed monitoring and increased process control.

Because of its flexibility and easy operation, the HSD06 is one of the more popular air dispersers. It is manufactured in INDC’s New Albany, IN factory, and is available with short lead-times, typically 2 days. Contact factory for details.

, by calling (800) 851-1049, or via email at 

INDCO presents their model HSD06 pneumatic, variable speed benchtop disperser with a 1-gallon capacity, which delivers maximum flexibility in many industrial settings. 

INDCO Variable Speed Air Dispersers Offer Versatility and Immediate Availability

Protection from hazardous fumes is ensured by the varaflow baffle system and by-pass inlets, to safely vent vapors, odors, and powders for maximum work safety. The ventilated work area is constructed of corrosion resistant composite resin surface panels. Tempered glass horizontal sliding door panels provide convenient access to the work area. Vapor proof or explosion proof lighting is provided.

A secondary containment basin, constructed of seamless composite polyresin, has coved corners and a sloped bottom to facilitate draining and cleaning of any accidental spillage. A raised fiberglass grate deck floor allows spillage to flow through. Specific requirements can be met through a variety of safety and service accessories, also available HEMCO. Call 816-796-2900 or visit 

Specifically designed for isolating hazardous materials, the HAZMAX Containment Work Area is engineered to isolate applications including large equipment distillation procedures, pilot plant requirements, and sampling/ weighing/ dispensing operations.

HazMax Protects Workers and the Environment

Welded steel with chemical resistant, epoxy powder coat finish, and 1” thick phenolic resin countertops, 4” high backsplashes, and flush ends standard. Standard height 36", ADA height 34", and sitting height 28" options are available.

Powder coat finish is environment friendly, attractive, and long lasting, color: Lab white. UniLine casework, quality & style for your laboratory. Casework is tested independently to be SEFA 8 compliant. Groupings can be supplied with optional Fume hoods.

Contact HEMCO for information at 816-796-2900 or visit 

UniLine design incorporates our most popular casework groupings to meet your laboratory needs. 

Products